Skillnad mellan versioner av "Formlabs Form 1+"
Från Uppsala Makerspace
Ramis (Diskussion | bidrag) |
Ramis (Diskussion | bidrag) |
||
| Rad 3: | Rad 3: | ||
For the form 1 plus custom resin: https://flexvat.com/ | For the form 1 plus custom resin: https://flexvat.com/ | ||
| − | For the stock resign vat and build plate: | + | For the stock resign vat and build plate: https://www.zvatindustries.com/ |
| − | When you use custom resin you will need this version of the slicer: | + | When you use custom resin you will need this version of the slicer: https://formlabs.com/eu/blog/open-source-dlp-slicer/ |
| − | Resting for form 1 stock setup: | + | Resting for form 1 stock setup: https://www.creativetools.se/hardware/3d-printers-and-accessories/resins/ftd-f1-blend-resin |
Nuvarande version från 27 december 2020 kl. 23.45
Resin printer / Stereolithography (SLA) .The printer has a custom bed and vat, to be able to use standard resin. The original bed & vat is available and easily replaced in order to use other resin.
For the form 1 plus custom resin: https://flexvat.com/
For the stock resign vat and build plate: https://www.zvatindustries.com/
When you use custom resin you will need this version of the slicer: https://formlabs.com/eu/blog/open-source-dlp-slicer/
Resting for form 1 stock setup: https://www.creativetools.se/hardware/3d-printers-and-accessories/resins/ftd-f1-blend-resin
